Water treatment equipmentRIEFILT
HF-RO ROMF 15304
Water treatment equipment
RIEFILT
HF-RO ROMF 15304
Année de construction
2026
État
Neuf
(entièrement fonctionnel)
Emplacement
Lüneburg 

Données de base
- Désignation de la machine:
- Water treatment equipment
- Fabricant:
- RIEFILT
- Modèle:
- HF-RO ROMF 15304
- Année de construction:
- 2026
- État:
- nouveau
- Fonctionnalité:
- entièrement fonctionnel
Prix et localisation
- Emplacement:
- Lüneburg, Allemagne

Appel
Détails techniques
Dimensions et poids
Longueur totale:
2 991 mm
Largeur totale:
2 438 mm
Hauteur totale:
2 591 mm
Système de transmission hydraulique
Pression de service:
75 barre
Détails de puissance
Tension d'entrée:
400 V
Consommation d'énergie:
30 kWh
Type de courant d'entrée:
triphasé
Plus de détails
Pression:
75 barre
Température:
38 °C
Détails sur l'offre
- Identifiant de l'annonce:
- A232-78981
- Mise à jour:
- dernière mise à jour le 03.11.2026
Description
DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID
The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity.
PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C)
- Inlet flow: 5.0 m³/h
- Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation
- Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water)
- Inlet temperature: +2 to +33 °C
- Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l
- Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6%
PROCESS
1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation
2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce
3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control
CLEANING
- integrated CIP for ultrafiltration and reverse osmosis
- cleaning tank 2 x 100 l with 7.5 kW heater
- 3 pneumatic dosing pumps for cleaning agents and chlorine
- programmed disinfection, long-term preservation, and re-commissioning
EQUIPMENT
- materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel
- valves in only two nominal sizes, interchangeable pumps, low variety of spare parts
- PLC with 15.6" touch panel, Ethernet interface for remote monitoring
- control of a frequency-controlled inlet pump
- control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65
DIMENSIONS
- main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H)
Blsdpfxe Ahqpgj Apbop
- RO module stand approx. 600 x 550 x 1,990 mm
APPLICATIONS
Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects.
SCOPE OF DELIVERY
Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description).
Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training.
NOTE
We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity.
PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C)
- Inlet flow: 5.0 m³/h
- Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation
- Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water)
- Inlet temperature: +2 to +33 °C
- Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l
- Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6%
PROCESS
1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation
2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce
3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control
CLEANING
- integrated CIP for ultrafiltration and reverse osmosis
- cleaning tank 2 x 100 l with 7.5 kW heater
- 3 pneumatic dosing pumps for cleaning agents and chlorine
- programmed disinfection, long-term preservation, and re-commissioning
EQUIPMENT
- materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel
- valves in only two nominal sizes, interchangeable pumps, low variety of spare parts
- PLC with 15.6" touch panel, Ethernet interface for remote monitoring
- control of a frequency-controlled inlet pump
- control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65
DIMENSIONS
- main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H)
Blsdpfxe Ahqpgj Apbop
- RO module stand approx. 600 x 550 x 1,990 mm
APPLICATIONS
Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects.
SCOPE OF DELIVERY
Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description).
Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training.
NOTE
We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.
L'annonce a été traduite automatiquement et des erreurs de traduction peuvent apparaître.
Documents
Fournisseur
Remarque : Inscrivez-vous gratuitement ou connectez-vous, pour accéder à toutes les informations.
Dernièrement en ligne : Hier
Enregistré depuis: 2023
5 annonces en ligne
Envoyer une demande
Téléphone & Fax
+49 176 3... afficher
Votre annonce a été supprimée
Une erreur est survenue


















